SWP Mig Welder 241

The MIG 241 is a versatile and robust single phase welding machines ideally suited to light or medium fabrication. On maximum power and maximum duty cycle the MIG 241 consumes only 7.8kVA and requires only a 20A fuse and can be used in the field from a 8kVA generator. Variable speed four roll wire feed is achieved through all-geared drive system, minimising the risk of wire slip to create uniform welds.Supplied with MB25-3m torch and reg. Proline MIG 241: Large cabinets can accept full height gas cylinder. Heavy duty front and rear wheels for increased stability. Copper wound transformer and choke. Forced air fan cooling. Overload warning indicator. Double support straps for gas cylinder. Infinitely variable wire speed. Spot weld time. Soft arc technology. M25-3 torch and 2068 regulator included. All geared 4-roll metal cast feed system. Digital volt and amp meter. Torch holder included. Additional features: Latch facility. Burnback control. Gas purge. MIG 241: Mains connection: 1-230V Fuse: 20A Voltage steps: 6 Welding current: 30-240A Duty Cycle: 100 percent at 100A, 60 Percent at 140A, 35 percent at 200A Welding wire diameter: 0.6 to 1.0mm Overall dimensions: 830 x 302 x 780mm